-
What are Plastic Alternative Steel Composites?
Combining the strength and rigidity of conventional steel with the benefits of plastics, like low weight, resistance to corrosion, and ease of production, plastic-to- steel composites are a breakthrough kind of high-performance material. Plastics have great adaptability and find usage in many dif...Read more -
What is the raw material of UV-resistant PA610 CF30 plastic?
This is a special technological plastic by combining the remarkable features of nylon 610 (PA610) with the reinforcing effect of 30% carbon fibre (CF30). PF30 PA610 has both of these features. UV light does not cause this material to break down. Carbon fibre adds not only to improve mechanical st...Read more -
How durable are carbon fiber composites?
Because of its reputation for outstanding mechanical qualities, low weight, and corrosion resistance, carbon fibre composites are particularly sought after in a variety of high-end applications. These qualities have helped them to be somewhat widely used. Conversely, as with any other material, o...Read more -
What are high-strength composite materials?
The result of two or more materials with diverse properties is the creation of new materials known as high-strength composites. These mixed materials are subjected to either physical or chemical treatments meant to reinforce and blend them thus enhancing their general performance. This is done wi...Read more -
What is high quality for automotive parts?
The quality of the components used in the automotive sector clearly affects the features of the vehicle, including performance, safety, and lifetime. There is no way one could ignore this relationship in any kind. Excellent quality components for cars should be able to satisfy many strict criteri...Read more -
What is the PA610 CF5 Nylon 610 5% Carbon Fiber combination?
The composite material referred to as PA610 CF5 consists of a matrix made of nylon 610, sometimes known as polyamide 610, or PA610 for short, and 5% carbon fibre, sometimes known as CF for short. This material is common in a wide spectrum because of its several specific physical and chemical prop...Read more -
What is Conductive PA612 CF40 40% Carbon Fiber Composite?
Conductive PA612, sometimes known as 40% carbon fibre reinforced polyamide 612 (PA612), is a material whose conductivity is raised by spreading carbon fibre reinforcements in a polymer matrix. This is an engineering plastic of high performance. This material combines the excellent mechanical prop...Read more -
What is PA610 CF5 Nylon 610 5% Carbon Fiber Combination?
Combining a matrix composed of nylon 610 (PA610) with 5% carbon fiber (CF) produces a high-performance composite material known as PA610 CF5 Nylon 610 5% Carbon Fiber Combination, therefore enhancing the material’s mechanical capabilities as well as processing characteristics. This material...Read more -
What’s carbon fiber?
What’s carbon fiber? Carbon fiber is an inorganic high-performance fiber with a carbon content of more than 90%, which is transformed from organic fiber through a series of heat treatments. It is a new material with excellent mechanical properties. It has the inherent characteristics of car...Read more -
Differences between T700 and T800 in carbon fiber
Differences between T700 and T800 T700 and T800 are two grades of carbon fiber. Their numbers represent the approximate tensile strength in kgf/mm2 or ksi. T700 is a grade of carbon fiber with a tensile strength of 4900MPa and a specific strength of 3060MPa, which is higher than T300 but lower th...Read more -
One Table Shows You about Carbon Fiber Classifications
As a high-end material, carbon fiber has the characteristics of light weight and high strength, especially the excellent strength-to-weight ratio. It has a very broad application prospect in the field of thermoplastic modified engineering plastics. It has important applications in aviation, aeros...Read more -
AP-RubberPlas 2024 Qingdao
Exhibition: Qingdao Asia-Pacific International Plastics and Rubber Industry Exhibition (AP-RubberPlas 2024) Exhibition Period: July 10, 2024 – July 13, 2024 Venue: Qingdao World Expo City International Exhibition Center (No. 3399, Sansha Road, West Coast New District, Qingdao City) Booth ...Read more
